3500W Watt All-In-One Solar Charge Inverter 110V AC Built-In 80A Mppt Controller

Description

3500W 48V All-In-One Solar Charge Inverter 220V AC Build-In 80A Mppt Controller
Overview
ECO-WORTHY HF series Inverter is a new hybrid solar energy storage inverter control all-in-one machine
integrating solar energy storage & commercial power charging energy storage and AC sine wave output. It adopts DSP control and has advanced response algorithms and high reliability through advanced control algorithms. And high industrialization standards. There are only four charging modes: solar power, city power priority, solar power priority, and city power & solar power; two output modes, inverter and city power, are available to meet different application needs.
Feature
● Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
● Two output modes: mains bypass and inverter output; uninterrupted power supply.
● Available in 4 charging modes: Only Solar, Grid power Priority, Solar Power Priority and Mains & Solar hybrid charging.
● Advanced MPPT technology with an efficiency of 99.9%.
● Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
● ON/OFF rocker switch for AC output control.
● Power saving mode available to reduce no-load loss.
● Intelligent variable speed fan to efficiently dissipate heat and extend system life.
● Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
● 360 ° all-round protection with a number of protection functions.
● Complete protections, including short circuit protection, over voltage and under voltage protection, overload
protection, reverse protection, etc.
Four  charging  modes：
Modes
Solar Power Only
Solar Power First
Power Grid First
Hybrid Charge
How to charge
solar charge only, no grid power charging
Only start the grid power charge when the solar power charge fails
grid power battery first, solar power started only when the grid power is invalid.
Hybrid charging of solar power and grid power, priority photovoltaic MPPT charging, when the photovoltaic energy is insufficient
Applicable to
The most cost-saving electricity, suitable for places with abundant solar energy resources
Used in areas where the power grid is relatively stable and electricity prices are relatively expensive.
It is suitable for areas with unstable power grid and can provide sufficient backup power supply at any time.
Three  output  modes：
Mode1：Solar power priority mode
Solar panel and battery supply power to the load, diversified charging modes and output modes are optional. When the photovoltaic priority mode is selected, green solar energy can be maximized to achieve energy saving and emission reduction.
When the photovoltaic is invalid, switch to the mains power supply. This mode maximizes the use of solar energy, while maintaining battery power, and is suitable for areas with relatively stable power grids.
Mode2:Grid power priority mode
Switch to inverter power supply only when grid pwoer  is invalid, equivalent to backup UPS, used in unstable grid area
Mode3:Inverter priority mode
Switch to grid power supply only when the battery is under voltage, this mode uses DC power to the greatest extent and is used in areas where the power grid is stable.
Specification :
AC Input MODE
Rated input voltage
110/120Vac
Input voltage range
(90Vac~140Vac) ±2%
Frequency
50Hz/60Hz（Auto detection）
Overload/short circuit protection
Circuit breaker
Efficiency
>95%
Conversion time（bypass and inverter）
10ms（typical）
AC reverse protection
Available
Maximum bypass overload current
40A
Invert MODE
Output voltage waveform
Pure Sine Wave
Rated output power（VA）
3500
Rated output power（W）
3500
Rated output voltage（Vac）
120V AC
Peak Power
7000VA
Bypass breaker specifications
40A
Rated battery input voltage
48V (Minimum starting voltage 44V)
Power saving mode
Load ≤25W
AC Charging
Battery type
Lead acid or lithium battery
Maximum charge current
30A
Charge voltage range
40 –60Vdc
Overcharge protection
Alarm and turn off charging after 1 minute
PV Charging
Maximum PV open circuit voltage
145Vdc
PV operating voltage range
60-145Vdc
MPPT voltage range
60-115Vdc
Battery voltage range
40-60Vdc
Maximum output power
4200W
PV charging current range (can be set)
0-80A
Charging short circuit protection
Blown fuse
Certified specifications
Certification
CE(EN62040-1)
EMC certification level
EN62040-2, C2
Operating temperature range
-15°C to 55°C
Storage temperature range
-25°C ~ 60°C
Heat dissipation
Forced air cooling, variable speed of fan
Size (L*W*D)
430mm*338mm*126mm
Weight (kg)
10
Product Details
Package Include:
1 pc 3500W 48V dc- 110V ac All-In-One MPPT Solar Charger Inverter
1 pair 1.5m 16mm²  Battery Extension Cable
1 pc user manual
Package Include:
Home
Farm
Boat
RV
ECO-WORTHY WARRANTY
On Aug-11-20 at 00:47:08 PDT, seller added the following information: