Sewer Jetter Kit for Pressure Washer Jetting Hose 1/4Inch NPT Drain Cleaner Hose

Description

Sewer Jetter Kit for Pressure Washer Jetting Hose 1/4Inch NPT Drain Cleaner Hose
Product Overview
The high-pressure sewer jetter hose can be widely used to toilet,sink,indoor and outdoor sewer,pipe,clean cars, motorcycles, floors, windows, driveways, roofs, siding, etc.
The sewer jetting hose of pressure washer can be used to remove indoor or outdoor drainage of many types, combined with any type of pressure washer, can easily flush obstacles and maintain flow. Clears blockages without the need for chemicals or detergents.
Sewer jetter kits are ideal for all types of medium and high-pressure jetting applications,Such as Karcher, Simpson, Green Work, Generac, Sun Joe, Dewalt, Briggs, Ryobi, EDOU, Tool Daily, Twinkle, Sooprinse, and other brands, can also pass 1/4''Plug is connected to a presure washer gun.
Package List:
1.Sewer jet hose * 1（50FT）
2.Rotating sewer jet nozzle * 1
3.Button nose sewer jetter nozzle *1
4.Coupler (female M22 to female 1/4’’ NPT) * 1
5.1/4’’ quick disconnect plug * 1
Specification:
1.Length: 50 FT
2.Connection: 1/4"M-NPT
3.Max Working Pressure: 11000 PSI
Work with lots electric and gas-powered pressure washers up to 5,000 PSI.
4.Temperature: -40°F / +140°F
Suitable for both hot and cold water
IMPORTANT:
1. Keep away from children
2.Water pressure is too high, do not shoot at the human body
3.The water temperature should not be too high.Rated water temperature: up to 160 Degrees F
4.Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use.
Application:
1.Button nose sewer jetter nozzle: 1 front jet located at 0 degree, which can flush the blockage, the 3 rear jet at 33 degree, flush away debris loosened by the front jet.
2.Rotating sewer jet nozzle: With 3 rear jets at 33 degree, the nozzle is easy to slide into the drain and sewer lines to clean and flush debris. It offers an even cleaning and flushes out debris.
【TIPS】
:If the nozzle hole blocked, remove the nozzle, clean with needle and rinse with fresh water. Be sure to wrap tape around the screw joint of the pipe before use.
【Note】
:Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use.