-40%

TRI-METRIC Battery Monitor System PACKAGE Fuse, Shunt & Cable for Solar, Wind RV

$ 145.18

Availability: 100 in stock
  • Condition: New
  • MPN: TM-2030-RV-F, SHUNT_500A_50MV, CAB22-50FT
  • Bundle Listing: Yes
  • Country/Region of Manufacture: United States
  • Brand: Bogart
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • UPC: Does not apply
  • All returns accepted: Returns Accepted
  • EAN: Does not apply
  • Return shipping will be paid by: Buyer
  • ISBN: Does not apply
  • Item must be returned within: 30 Days

    Description

    Bogart Engineering TRI-METRIC Battery System Monitor Package
    Includes fuse, shunt, and 50' cable
    TRI-METRIC Battery System Monitor with Fuse
    The TriMetric 2030 is used to monitor battery systems used in remote homes, RVs or boats that have batteries that store solar, wind, or possibly generator powered chargers.
    Monitor shows:
    Battery % full
    Voltage
    Energy in/out
    Days since full charge
    Features:
    Country of Origin: USA
    Compatible Models: TM2030-A
    Good lightning protection
    Easy to read display–easy to darken
    Defaults to “Level 1” for most users to keep operation simple. Choose Level 2 or 3 for more technical users.
    Dimensions (LxWxH): 11x8x4 inches
    Weight: 1 pound
    Measures battery % full, based on amp hour measurements for accurate information on how much battery energy is left.
    This method is more accurate than monitors that use only voltage to determine how full your batteries are, especially when they are between 30-90% full.  Battery system size: 10-10,000 amp hours.
    Measures battery charging or discharging amps—or watts:
    To check that chargers are still charging at proper amounts—also to check to see how much your loads are drawing—and to discover phantom 24 hour loads that you may not know about.
    Measures battery volts (9.0 to 75):
    to verify that chargers are charging to correct voltage for your batteries.
    New with the TM-2030:
    Audible low battery alarm, based on volts and % full. May be silenced.
    Measures days since charged:
    Shows how many days have elapsed since batteries were last fully charged. Batteries can lose ability to hold charge if this becomes too long.
    Shows days since equalized:
    A reminder to equalize at appropriate time if you do manual equalizations.
    New with the TM-2030:
    Displays replaced percentage of charge, compared to most recent discharge
    Many battery company experts are now recommending that when recharging, 110-120% of recently withdrawn energy should be replaced for wet cell lead acid batteries to prevent loss of capacity and 104-108% for AGM types. This new function makes it easy to know if they have been sufficiently charged.
    *Requires shunt: 500A/50mV shunt allows amp measurements from 0.1-over 400 Amps.
    Logged data functions:
    You may not need this, but a technician trying to diagnose what is wrong will find these very helpful:
    Data for each of last five charge/discharge cycles:
    Length of the cycle.
    How long ago the cycle ended.
    Lowest % full reading
    Lowest battery voltage.
    Cycle charge efficiency (percent)
    Data for each of the last five days:
    Highest voltage that day
    Lowest charging current
    Total percentage overcharge for that day
    500 Amp 50mV DC Shunt
    Specifications:
    Resistance:
    500 Amp at 50 millivolts, or 0.1 milliohm.
    Max. steady state current, amps:
    410 Amperes
    Thermal time constant:
    18 minutes
    Overload current:
    If normally operated at less than 300 amps, it will take overloads to 500 amps for durations of less than 5 minutes.
    Physical characteristics:
    Has a plastic base 3.25 x 1.75 in. with two mounting holes .205 "dia, 1.25" apart o.c. 1.75 inches overall height. High current connections are made to two bolts (3/8"-16) which are 1.50 in. apart (o.c).
    Use with the MidNite Solar Whizbang for monitoring your batteries or pair with your power inverter.
    50' Cable Assembly for Tri-Metric Meter
    Fifty foot cable assembly for use with the Tri-Metric Battery Monitoring System.
    Cable Features:
    Four #22 AWG gauge wires (two twisted pairs) with a 1 amp fuse and ring terminals.  Two black, one white, one red wire.
    CLICK HERE TO SEE OUR FULL LINE OF WIND AND SOLAR PRODUCTS!
    We do not mark items as gifts or under report values for customs. For International buyers,
    it is strongly recommended to check your own country's tax practices as we do not
    pay your taxes, duty or customs fees.
    We do not over charge for shipping; it is simply what the shipping calculator comes up with.
    Customs fees or taxes are not included in shipping, it is your responsibility to pay them.
    UPS orders are signature required at our discretion!! Contact us right away if you need to make other arrangements!
    Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better.